E-11 Blaster Scope Prop Electronics Kit

E-11 Blaster Scope Prop Electronics Kit


    This is the Electronics Kit for the 3D Printed E-11 Blaster Scope Prop

    Pictures of the Electronic Components will be added soon

    Parts Included:

    • 1 x Arduino Pro-Mini 328P - Pre Programmed with the Scope Code
    • 1 x 0.49" IIC OLED Display Screen
    • 1 x Red Dot LED Laser Diode
    • 2 x 2-Pin Micro JST Connector Sets
    • 1 x 3-Pin Micro JST Connector Set 
    • 1 x 6 x 6 x 5mm Tactile Momentary Switch
    • 1 x 30mm Magnifying Cabochon Lens
    • 1 x Green Tinted Film for Lens


    2 Pin Micro JST - Used to connect the LED Laser to the Arduino Pro-Mini, the other to supply power to the Arduino Pro-Mini

    3-Pin Micro JST - Used to connect the Momentary Switch to the Arduino Pro-Mini

    The 0.49" IIC OLED Screen is connected directly to the Arduino Pro-Mini (Once the Screen is attached to the Screen Holder)


    Here is a Video of the Prototype in Action


    Simple to Assemble 

    Please Note: Parts will require sanding to finish and make some parts fit snug. Remember to allow room when fitting together for the thickness of the paint.

    Assembly requires only basic tools and some glue. Hot glue is used to fix the Screen Holder and Switch Holders in place. 

    The Screen Holder should be tight for inside the Scope. The Switch Holder will require some sanding to make fit but must be snug.

    The Front Tube and Laser Holder are Push Fit but can be glued if required.

    The Eye Piece is also Push Fit but again can be glued if required.


    Purchase the Electronics Components Kit

    Purchase a fully completed Scope with the electronics pre installed.


    Package Includes:

    1 x E-11 Blaster Scope Electronics Kit



    Please Note: DIY electronics are meant for those with basic electrical knowledge and soldering skills. DIY electronics do not include lead wires, instructions or warranties.


    Before placing your ordering, please make sure you are fully aware of the shipping policy outlined here: Shipping Policy


    Write a review

    Please login or register to review

    • Product Code: GE00099
    • Availability: In Stock

    • £35.50


    Related Products