Arduino Leonardo Pro Micro Atmega32U4
Arduino Compatible Leonardo Pro Micro Atmega32U4
The Arduino Leonardo Pro Micro is similar to the Pro mini except with a ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface.
This tiny little board does all of the neat-o Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC.
- ATmega32U4 running at 5V/16MHz
- Supported by Arduino IDE v1.0.1
- On-Board Micro-USB connector for programming
- 4 x 10-bit ADC pins, 12 x Digital I/Os
- Rx and Tx Hardware Serial Connections
When you open the Arduino IDE software, pls go to the tool and choose the board "Arduino Leonardo"
Drivers for both Windows and Mac are freely available for download on the internet along with full instructions on how to install them
- Microcontroller – ATmega32U4
- Operating Voltage – 5V
- Input Voltage (Regulated) – 5V DC/500mA into VCC Pin
- Input Voltage (Unregulated) – 6V to 12V DC into RAW Pin
- Digital I/O Pins – 12
- PWM Channels – 5
- ADC Pins – 4 x 10-bit
- Hardware Serial Connections – Rx and Tx
- Clock Speed – 16MHz
- Dimensions – 33 x 17.7mm
- Weight – ± 6.5g
1 x Arduino Leonardo Pro Micro - Atmega32U4
Please Note: DIY electronics are meant for those with basic electrical knowledge and soldering skills. DIY electronics do not include lead wires, instructions or warranties.
Before placing your ordering, please make sure you are fully aware of the shipping policy outlined here: Shipping Policy
- Brand: Arduino
- Product Code: GE00072
- Availability: In Stock